isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 100sp2t1b9m1qeh 2:1 6/23/2011 ST112005 a bgl 1 1 123 3 panel mounting with standard locking ring a 20028 released for production 6/23/11 bgl pos. 1 pos. 2 pos. 3 switch function none on (on) 2-3 n/a 2-1 () = monentary 2 13 circui: spdt 10.41 [.410 in] 2.92 [.115 in] n e-switch marking on opposite side 7.52 [.296 in] 8.89 [.350 in] note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 5a @ 120vac or 28vdc 2a @ 250vac 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength : 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be shipped bulk: t100011 - lock washer (1) t100002 - lock ring (1) t100000 - hex nut (2) t100016 - "o" ring (1) epoxy seal n 11.81 [.465 in] 6.86 [.270 in] 12.70 [.500 in] 5.72 [.225 in] flat .51 [.020 in] 1/4-40 uns - 2a 1.44 [.057 in] 3.96 [.156 in] 1.98 [.078 in] 2.03 [.080 in] 1.19 [.047 in] .76 [.030 in] 4.70 [.185 in] 25 ~ pos. 1 pos. 3 n 2.38 [.094 in] n 6.35 [.250 in] 6.10 [.240 in]
|